Modular belt conveyors

Through the positive locking drive and the side rail, modular conveyors are recommended where a belt is not possible due to slip, and an unfavorable length-width ratio or transverse forces. On request we design with reinforced bearings, supplemental supports of the drive shaft, as well as an appropriate number of additional sprockets, and thus exploit the full performance capacity of the chain.

Additional information belt conveyors

Modular belt conveyor MBF-P 2040


MBF-P 2040
MBF-P 2040

Due to the selection of different chain materials, the MBF-P 2040 conveyor system with modular belt chain can also be used for food industry applications and for products with high temperatures to 105°C. As a rule, modular belt chains are more resistant to wear than are belts, in addition fluids from the transported material can drip off through the chain. Due to the guide of the belt, lateral deviation does not occur, thus workpieces can also be pushed off transversely. Due to its positive-fit drive, the MBF-P 2040 can handle high loads, even at narrow belt widths.

Dimensions - Technical Data

  • Conveyor width B: 200 to 1000 mm (in 50 mm increments)
  • Conveyor length: Custom from 475-10000 mm
  • Total load: up to 250 kg
  • Drive & speed: to v = 30 m/min
  • Drive versions: AC, AS

Curved modular belt conveyor KMF-P 2040


The modular belt conveyor KMF-P 2040 is available with several track layouts (L/S/U) and curve angles of 45° or 90°. Using individual variations, the track layout can be perfectly tailored to the existing conditions. The different conveyor widths ranging from 164mm upto 1005 mm and offer a very good effective width ratio, which is of advantage in confined spaces on site. In addition, the system is modular in structure and in combination with straight and incline conveyors practically all track layouts can be implemented in three-dimensional space.

Dimensions - Technical Data

  • Conveyor width: 164mm; 241mm; 317mm; 394mm;470mm; 546mm; 623mm; 699mm; 776mm; 852mm; 928mm; 1005 mm
  • Effective width: up to B = 394mm the usable width is BN = B-30mm, from B = 470mm it is BN = B-35mm
  • Conveyor length: custom from 475-10000 mm
  • Total load: up to 150 kg
  • Drive & speed: to v = 30 m/min
  • Drive versions: AC, AF, AS

Flyer Curved modular belt conveyor KMF-P 2040

Incline modular belt conveyor KFM-P 2040


Our KFM-P 2040 with a modular belt chain of plastic is used to transport injection-molded parts, lightweight punched parts or food products. Various chain materials allow use at high temperatures to 105°C. As a rule, modular belt chains are more resistant to wear than are belts, in addition fluids from the transported material can drip off through the chain. Cleaning of the modular belt chain is easy and fast, consequently this chain is often used in the food industry.

Dimensions - Technical Data

  • Conveyor width B: 200 to 1000 mm (in 50 mm increments)
  • Conveyor length L1+L2+L3: up to 4000 mm
  • Belt bend: 30, 45 and 60°
  • Total load: up to 100 kg
  • Drive & speed: to v = 30 m/min
  • Drive versions: AC, AS

Incline conveyor with steel link belt KFS-P 2040.86


Our incline conveyor with steel link belt is primarily used to transport punched parts, cast parts, forged parts, or even wood parts. It is very well suited for conveying products with high temperatures. Due to a gap of 1-3 mm between the side rail and belt, the conveyor system is not suitable for discharge of pointed punch scrap or metal chips. The hinged plate belt can also be supplied in stainless steel or in a perforated version on request.

Dimensions - Technical Data

  • Conveyor width B: 210 to 710 mm (in 50 mm increments)
  • Conveyor length L1+L2+L3: up to 10000 mm
  • Belt bend: 15, 30, 45 and 60°
  • Total load: up to 150 kg
  • Drive & speed: to v = 12 m/min
  • Drive versions: AC, AS
feedback configurator