Extensive portfolio of weld-on profiles such as cleats and side walls for transporting bulk material or for inclines and declines.
Belt conveyors can be equipped with transverse cleats, longitudinal cleats or side walls, depending on the transport requirements. These components are additional profiles that are bonded to the belt conveyor. When selecting a cleat profile, please note that the cleat must be of the same material as the belt. Interrupted transverse cleats are possible, as are combinations of longitudinal and transverse cleats. The distance from the cleats to the edge of the belt must be at least 2 mm.
The bonding points on the cleats generally have more limited temperature range than the belt and clean material itself.
PVC -10 to +70°C
PU -30 to +80°C
PE -30 to +100°C
For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-0 or using the contact form below.