Transfer System Versamove plus

The All-Rounder of the workpiece carrier Systems

Versamove plus is a versatile workpiece carrier transfer system with a high load capacity of up to 150 kg/m and 100 kg/workpiece carrier. The system transports workpieces of any dimensions within the system limits of 400 x 400 mm to 800 x 1040 mm. Product-specific workpiece fixtures are implemented according to customer specifications.

 

Typical application areas for the Versamove plus include:

  • Automotive industry
  • White goods
  • Vacuum technology
  • Entertainment electronics
  • Electrotechnology
  • Plastics industry

Technical Data of the Versamove plus

  • Total load per workpiece carrier: up to 100 kg
  • Workpiece carrier sizes: width from 400 to 800 mm; length from 400 to 1040 mm
  • Conveyor frame cross section: 100 x 50 mm
  • Conveyor types: timing belt conveyor, chain conveyor, accumulating roller chain conveyor
  • Special features: various workpiece carrier sizes

Overview of the Modules

WT 2010 Workpiece carrier

 

  • Aluminium support plate (steel optional)
  • Positioning sockets in the support plate for positioning and rotating the workpiece carrier
  • PE wear strips (antistatic optional)
  • Integrated bumper
  • Total load up to 100 kg
  • Width: 400 bis 800 mm
  • Length: 400-1040 mm

ZRF-P 2010 Timing Belt Conveyor​​​​​​​

 

  • Suitable for limited accumulated operation
  • Ideal for cycling operation
  • High acceleration
  • Reverse operation possible
  • Low maintenance
  • Antistatic design optional
  • Length: 500-6000 mm
  • Total load 250 kg, distributed load 100 kg/m
  • Speeds up to 60 m/min
  • PAR/PAZ coating

KTF-P 2010 Chain Conveyor​​​​​​​

 

  • Very sturdy
  • High operating temperatures
  • Suitable for even dirty environments
  • Reverse operation possible
  • Antistatic design optional
  • Length: 500-10000 mm
  • Total load 1000 kg, distributed load 150 kg/m
  • Speeds up to 30 m/min

SRF-P 2010 Accumulating Roller Chain Conveyor​​​​​​​

 

  • Ideal for accumulated operation
  • High operating temperatures
  • Accumulating rollers available in steel and plastic
  • Antistatic design optional
  • Length: 500-10000 mm
  • Total load 750 kg, distributed load 150 kg/m
  • Speeds up to 30 m/min

HQZ 2010 Lift and Transfer Conveyor (Corner Transfer Unit)​​​​​​​

 

  • Low height
  • Pneumatic lifting motion
  • Guided by recirculating ball bearing guides
  • Manual tensioning device included
  • Inductive position detection
  • Loads up to 100 kg
  • Speeds of 6; 9; 12; 15 and 18 m/min
  • Stroke: 25 mm

HDE 2010 Lift and Rotate Unit

 

  • Low height
  • Custom rotation speeds
  • Pneumatic lifting and turning motion
  • Guided by linear roller bearings and guide rods
  • Inductive position detection
  • Loads up to 100 kg
  • 90° and 180° rotation

SU Undamped Stopper / SD Damped Stopper​​​​​​​

 

  • Damped and undamped stopping
  • Electrical or inductive stopper detection possible
  • Single or dual acting
  • Direct mounting on the conveyor frame (no additional holders required)
  • Permissible load depends on the stopper variant and the conveying speed

PE 2010 Positioning Unit (Lift and Locate Unit)​​​​​​​

 

  • Positioning in the X, Y and Z directions
  • Positioning sockets in the workpiece carrier’s support plate for positioning
  • Pneumatic lifting and positioning
  • Repeatability: ± 0,1 mm
  • Cylinder stroke: 40 mm

KHL 2010 Short Stroke Lift​​​​​​​

 

  • Travel to two transport heights
  • Pneumatic lifting and lowering
  • Continuously adjustable speed
  • KTF, ZRF and SRF conveyor types possible (ZRF shown here)
  • Effective load up to 100 kg

WTZ 2010 Maintenance Access​​​​​​​

 

  • Conveyor folds up to allow easy access to interior space
  • Fast and safe maintenance
  • Pneumatic springs prevent conveyor from falling back
  • Safety interlock protects against unauthorised access

Contact

For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-­0 or using the contact form below.

* mandatory fields