Transfer System Versamove standard

The Compact Workpiece Carrier Circulation System

Versamove standard is the most compact of the Versamove systems. It offers affordable curve modules and is compatible with systems and workpiece carriers on the market, made possible by our specially developed 45 mm aluminium profile, which serves as the basis for the entire system. It can therefore be easily connected to existing systems.

 

The system transports workpiece carriers from 240 x 240 to 400 x 400 mm, with custom dimensions or dimensions in 80 mm intervals possible. The special feature of this system is its affordable curve modules, which are equipped with a flat top chain or, for compact curves in tight spaces, a round belt.

 

Typical application areas for the Versamove standard include:

 

  • Automotive industry
  • Entertainment electronics
  • Household appliances
  • Electrotechnology
  • Toy industry

Technical Data of the Versamove standard

  • Total load per workpiece carrier: up to 40 kg
  • Workpiece carrier sizes: width 240, 320, 400 mm; length 240, 320, 400 mm
  • Conveyor frame cross section: 100x45 mm
  • Conveyor types: flat top chain conveyor, timing belt conveyor, accumulating roller chain conveyor
  • Special features: curved

Overview of the Modules

WT 2045 Workpiece carrier​​​​​​​

 

  • Aluminium support plate (steel optional)
  • Positioning sockets in the support plate for positioning and rotating the workpiece carrier
  • PE wear strips (steel optional)
  • Integrated bumper
  • Antistatic design optional
  • Total load up to 40 kg
  • Width and length: 240, 320, 400 mm

FPF-P 2045 Flat Top Chain Conveyor

 

  • Suitable for accumulated operation
  • Curved (600 mm minimum radius)
  • 90° and 180° curves
  • Automatic tensioning device included
  • Antistatic design optional
  • Length: 500-6000 mm
  • Total load: 400 kg, distributed load: 70 kg/m
  • Speeds:: 6; 9; 12; 15 und 18 m/min

ZRF-P 2045 Timing Belt Conveyor

  • Suitable for limited accumulated operation
  • Ideal for cycling operation
  • High acceleration
  • Reverse operation possible
  • Low maintenance
  • Antistatic design optional
  • Length: 500-6000 mm
  • Total load 200 kg, distributed load 60 kg/m
  • Speeds of 6; 9; 12; 15 and 18 m/min
  • PAR/PAZ coating

SRF-P 2045 Accumulating Roller Chain Conveyor​​​​​​​

 

  • Ideal for accumulated operation
  • High operating temperatures
  • Accumulating rollers available in steel and plastic
  • Automatic tensioning device included
  • Antistatic design optional
  • Length: 500-6000 mm
  • Total load 700 kg, distributed load 80 kg/m
  • Speeds of 6; 9; 12; 15 and 18 m/min

KER 2045 Compact Curve Unit​​​​​​​

 

  • 90° and 180° in the smallest space (other angles possible on request)
  • Particularly suited to parallel conveyor lines that are positioned close to one another
  • Replaces lift-and-transfer units and lift-and-rotate units (workpiece maintains its orientation)
  • Available with its own drive or can be driven by the adjoining line
  • Medium of transport: Round belt 

HQZ 2045 Lift and Transfer Conveyor (Corner Transfer Unit)

 

  • Low height
  • Pneumatic lifting motion (20 mm)
  • Guided by linear roller bearings and guide rods
  • Manual tensioning device included
  • Inductive position detection (reed contact optional)
  • Top cover available as stainless steel sheet (clear Makrolon optional)
  • Loads up to 40 kg
  • Speeds of 6; 9; 12; 15 and 18 m/min

HDE 2045 Lift and Rotate Unit​​​​​​​

 

  • Low height
  • Custom rotation speeds
  • Pneumatic lifting and turning motion
  • Guided by linear roller bearings and guide rods
  • Inductive position detection (reed contact optional)
  • Loads up to 40 kg
  • 90° and 180° rotation

SU Undamped Stopper / SD Damped Stopper

 

  • Damped and undamped stopping
  • Electrical or inductive stopper detection possible
  • Single or dual acting
  • Direct mounting on the conveyor frame (no additional holders required)
  • Permissible load depends on the stopper variant and the conveying speed

PE 2045 Positioning Unit (Lift and Locate Unit)​​​​​​​

 

  • Positioning in the X, Y and Z directions
  • Positioning sockets in the workpiece carrier’s support plate for positioning
  • Inductive position detection
  • Repeatability: ± 0,1 mm
  • Cylinder stroke: 30 mm

KHL 2045 Short Stroke Lift​​​​​​​

 

[Translate to English:]

  • Travel to two transport heights
  • Pneumatic lifting and lowering
  • Continuously adjustable speed
  • FPF, ZRF and SRF conveyor types possible (ZRF shown here)
  • Effective load up to 100 kg

WTZ 2045 Maintenance Access​​​​​​​

 

  • Conveyor folds up to allow easy access to interior space
  • Fast and safe maintenance
  • Pneumatic springs prevent conveyor from falling back
  • Safety interlock protects against unauthorised access

Contact

For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-­0 or using the contact form below.

* mandatory fields