Aluminium Profile Structures under Various Operating Conditions

Messkammer 01

Problem definition
Measuring chambers are required for integration in a semi-automated production plant. The chambers must be completely enclosed and blacked out for the use of 3D camera systems. The products to be inspected are to be transferred to the chamber using automated guided vehicle systems...

Discover more

Intelligent software independently learns to detect, distinguish between and rate optical defects. The system described inspects small lacquered parts in a cycle. It also automates the quality assurance process in the production of small parts. The fact that the software can even see the faults is...

Discover more
Transport ölhaltiger, scharfkantiger Produkte mit Knickförderer

Problem definition
Two machines in a pipe machining process need to be interlinked. Trimmed pipe pieces need to be transported to the next machine where they can be stamped. The pipe pieces are oily and have sharp edges. The interlink system must open to allow vehicles and transport boxes to pass...

Discover more
Branche Batterieproduktion

Problem definition
A modular and flexible process and systems concept was required for a research project. Metal foils needed to be coated with electrode material for the production of lithium-ion batteries. Aluminium or copper is used as the substrate, depending on whether cathodes or anodes are...

Discover more
valibat_schwebeofen

Problem definition
A process and a system for coating metal foils needed to be developed for a research and development project. The metal foils are used in the production of lithium-ion batteries. After coating, the foil must be dried before it can be calendered and rewound into a coil. The...

Discover more
Interlinking for canister transport with a bridge 01

Problem definition
Two machining stations in a plastic canister production process need to be interlinked. The solution has to cope with inconvenient spatial constraints: Empty canisters need to be conveyed along a curve and past another machine so that they can be brought back to the original feed...

Discover more
Staubschutzhaube 01

Problem definition
A hood for extracting dust particles is required for the production of laboratory equipment. The contour as well as the inputs and outputs are specified by the customer. The hood must be equipped with a suction nozzle for an extraction system provided by the customer. It must also...

Discover more
Schutzkabine 01

Problem definition
A protective device guard built according to a customer-supplied drawing is required for the packaging area of a toothbrush production operation. The toothbrushes are already in their primary packaging, so there are no sanitary requirements. The protective device guard is located...

Discover more
System line for rhizotron screening 02

Problem definition
Planning, design, and construction of an automated system line for rhizotron screening (researching the root growth of plants). The rhizotron packages should be capable of being pivoted automatically and being removed individually for recurring photography in a darkened housing....

Discover more
Mobile test bench with storage system in a maritime container 05

Problem definition
To feed and discharge containers from a multi-level storage system, the containers need to be raised to the various storage levels and then lowered again by a parallel storage line. The available space is very limited. The machine should be as reliable and require as little...

Discover more