Problem definition
Transporting unpackaged food products to which granules are adhered. The food products are transported laterally onto a horizontal transport line. They need to be transported away and conveyed upwards at an angle. Applicable food production regulations need to be complied with.
m…
Problem definition
Sheets of various sizes need to be conveyed in a metalworking application. The conveyor technology needs to be easily adjustable for different sheet formats. It also needs to be mobile and flexible. The solution needs to support a total load of 100 kg, and only low speeds are…
Problem definition
In an application for producing plastic fuel tanks, the blow-moulded tanks need to be fed into a multi-level storage system, where they are allowed to cool. The cycle must take a certain amount of time so that the tanks have sufficient time to cool. The tanks also need to be…
Problem definition
Replacement of a simple slide with a system that gently handles blow-molded parts, which in some cases are still plastiline, with automation, and transports them off. The blow-molded parts must be vertically transferred to the discharge gripper of the blow molding system.…
Problem definition
Heavy loads should be transported via a conveyor system. The transport system should have a transfer that is as free of gaps as possible. The transport mass can briefly weigh as much as a ton and the linear speed should be between 0.03 - 0.3 m/min (high-speed values and…
Problem definition
Design and production of a box filling machine for different tube formats of the cosmetics industry. Capacity: 200 tubes/min, 4 boxes/min. Chaining of upstream filling stations and integration of the provided scale with NOK outsorting of tubes. Chaining of box erectors from…
Problem definition
For use with our patented, automation-ready reusable trays known as IKLTs (innovative small load trays), the customer requires a low-cost automation solution with semi-automatic transfer and an automatic unit for stacking and unstacking the trays from the base of the transport…
Problem definition
Linking a production system for brake shoes. Continuous transport of ferromagnetic workpieces from a transfer height of 1,000 mm to a transport elevation of approx. 2,500 mm. During transport, the products must not change their position. The conveyor must be adjusted to meet the…
Problem definition
For a testing process, an entire system needs to be integrated into a maritime container so that the system can be used worldwide. Space is therefore extremely limited. A worker sorts the products to be tested into containers. The containers need to be conveyed into the system,…
Problem definition
In a testing process, containers need to be fed into a storage system and then discharged. After they are fed into the system, the containers need to be shaken and then positioned so that a robot can remove a sample. A worker fills the containers with products to be tested and…