Problem definition
An existing interlink for transferring pallets in a food production application needs to be expanded. Capacities and production need to be increased from about 500 pallets to around 1500 pallets. This corresponds to approximately 100,000 products in the final expansion stage.…
Sheets of various sizes need to be conveyed in a metalworking application. The conveyor technology needs to be easily adjustable for different sheet formats. It also needs to be mobile and flexible. The solution needs to support a total load of 100 kg, and only low speeds are…
Problem definition
In an application for producing plastic fuel tanks, the blow-moulded tanks need to be fed into a multi-level storage system, where they are allowed to cool. The cycle must take a certain amount of time so that the tanks have sufficient time to cool. The tanks also need to be…
Problem definition
Replacement of a simple slide with a system that gently handles blow-molded parts, which in some cases are still plastiline, with automation, and transports them off. The blow-molded parts must be vertically transferred to the discharge gripper of the blow molding system.…
Design, construction and start-up of a semi-automated workstation interlink system for rotating assemblies for stretching synthetic fibres. The workpiece carriers are provided in three different variants for the rotors, the housings and the finished assemblies. Part of the…
Problem definition
The customer required a palletiser with a connected tray recirculation system: Pallet trucks are used to feed Euro pallets loaded with trays into the system and then remove them again at the end of the process. The palletiser destacks filled trays from the pallets and feeds them…
Problem definition
Heavy loads should be transported via a conveyor system. The transport system should have a transfer that is as free of gaps as possible. The transport mass can briefly weigh as much as a ton and the linear speed should be between 0.03 - 0.3 m/min (high-speed values and…
Problem definition
In order to link a manufacturing process, during which a machine that is integrated downstream, functions at a slower speed but operates longer, a transfer system is required using a buffer zone for 40 pallets arranged in 5 levels and capable of transporting a total load of 10…
Problem definition
Planning, design, and construction of an automated system line for rhizotron screening (researching the root growth of plants). The rhizotron packages should be capable of being pivoted automatically and being removed individually for recurring photography in a darkened housing.…
Problem definition
To feed and discharge containers from a multi-level storage system, the containers need to be raised to the various storage levels and then lowered again by a parallel storage line. The available space is very limited. The machine should be as reliable and require as little…