ZRF-P 2010
AF – Direct head drive B20.10.357
Since the motor is fitted directly onto the drive shaft, the space requirements and maintenance effort
for this drive version are reduced to a minimum. Since the timing belt returns within the profile, welded-on
cams cannot be used. The ZRF-P 2040 should be used for this purpose.
For information about wear strip options, see page 168 Flange ø 80
Technical data
Conveyor length L individual from 500 to 6000 mm
Conveyor width B 200 to 1000 mm
Timing belt width 32 mm p. 172
Drive location discharge end left/right
Drive and speed up to 60 m/min, higher on request p. 12
Stand and side rail from p. 286
Standard total load up to 250 kg higher on
164
4
ø(DW) 89 ø(DW) 89
Timing Belt Conveyors
request
Standard distributed load up to 100 kg/m
Flange ø 120