AS – Head drive, laterally on the outside, compact B20.10.355
The drive positioned laterally on the outside allows the total height of the conveyor to be restricted to a
minimum. Since the timing belt returns within the profile, welded-on cams cannot be used. The ZRF-P 2040
should be used for this purpose.
For information about wear strip
options, see page 168
Technical data
Conveyor length L individual from 700 to 6000 mm
Conveyor width B 200 to 1000 mm
Timing belt width 32 mm p. 172
Drive location discharge end left/right
Drive and speed up to 60 m/min, higher on request p. 12
Stand and side rail from p. 286
Standard total load up to 250 kg higher on
165
4
ZRF-P 2010
ø(DW) 89 ø(DW) 89
request
Timing Belt Conveyors
Standard distributed load up to 100 kg/m