BF – Lower belt drive, direct B20.10.359
Since the motor is fitted directly onto the drive shaft, the space requirements and maintenance effort for
this drive version are reduced to a minimum. The compact conveyor frame design and the ability to freely
select the drive position anywhere along the entire length of the conveyor make it easier to integrate the
conveyor into existing systems. The conveying direction is reversible. Since the timing belt returns within
the profile, welded-on cams cannot be used. The ZRF-P 2040 should be used for this purpose.
167
4
ø(DW) 89
ø(DW) 89
ø(DW) 89
ZRF-P 2010
Timing Belt Conveyors
For information about wear strip options, see page 168
Technical data
Conveyor length L individual from 700 to 6000 mm
Conveyor width B 200 to 1000 mm
Timing belt width 32 mm p. 172
Drive location left/right underneath
Drive and speed 5; 6.3; 8; 9.5; 11.5; 13.5; 15.2;
19.3; 23; 26; 36.6; 45.7 and 57 m/min p. 12
Stand and side rail from p. 286
Standard total load up to 250 kg higher on
request
Standard distributed load up to 100 kg/m