BF – Lower run drive, direct B20.10.472
Since the motor is fitted directly onto the drive shaft, the space requirements and maintenance effort for
this drive version are reduced to a minimum. The compact conveyor frame design and the ability to freely
select the drive position anywhere along the entire length of the conveyor make it easier to integrate the
conveyor into existing systems. The conveying direction is reversible. Operation with cleats is not possible
with this version.
189
5
KTF-P 2010
For information about wear strip options, see page 190 onwards
Technical data
Conveyor length L individual from 700 to 10000 mm
Conveyor width B 200 to 2000 mm
Chains 1/2" single or duplex p. 216
Drive location left/right underneath
Drive and speed 5; 6.3; 8; 9.5; 11.5; 13.5; 15.2; 19.3;
Chain Conveyors
23; 26; 36.6; 45.7 and 57 m/min
p. 12
Stand and side rail from p. 286
Standard total load up to 500 kg up to
1000 kg
Standard distributed load up to 150 kg/m (with duplex chain) on request