197
5
SRF-P 2010
AC – Standard head drive B20.10.566
The drive chain on indirect drives can be used as a reduction gear. This makes it easy to design the
conveyor
with the appropriate speed, particularly in the low-speed range. In addition, the drive chain can
compensate for alignment errors and assembly tolerances to ensure that both lines run synchronously.
Technical data
Conveyor length L individual from 730 to 10000 mm
Conveyor width B 200 to 2000 mm
Chains 1/2" accumulating roller chain with plastic or steel rollers p. 217
Drive location discharge end left/right, underneath
Drive and speed up to 30 m/min p. 12
Stand and side rail from p. 286
Standard total load up to 500 kg (750 kg without accumulated operation) higher on
request
Standard distributed load up to 100 kg/m (in series)
up to 150 kg/m (offset)
Chain Conveyors
For information about wear strip
options, see page 202
Available with optional tensioning device
and lubrication station (see page 219)