Tail 19 B80.00.006
2 ø 53
Conveyor length L Conveyor width B L1 L2 Head part material
48
≤ 2,900 mm ≤ 300 mm 105 mm 145 mm Plastic
≤ 2,900 mm > 300 mm 105 mm 145 mm Aluminium
> 2,900 mm ≤ 800 mm 155 mm 195 mm Aluminium
ø 19
48
GUF-P 2000 Tails
Crowned roller, ø 53 mm
Ball bearing 2RS1
ø 16 mm shaft journal, usable length of 20 mm
with roller for chain drive or 30 mm with roller
for timing belt drive, keyway in accordance with
DIN 6885
Connection of two conveying lines through one
drive
Output shaft available on the right, left or both sides
*Does not apply for the drive end
Tail 13 B80.00.018
Rolling knife edge
Ball bearing 2RS1, ø 19 mm roller
Belt tensioning on the side using tensioning
elements
Adjustment using tensioning elements
Min. length of the conveyed product for transfer
of 48 mm
Note the min. bend radius for the desired belt
Conveyor length L Conveyor width B L1 L2 Head part material
≤ 3,000 mm ≤ 800 mm 116 mm 156 mm Aluminium
> 3,000 mm ≤ 800 mm 166 mm 206 mm Aluminium
Belt Conveyors