BC – Lower belt drive, standard B20.40.004
The compact conveyor frame design and the ability to freely select the drive position over the entire length
of the conveyor make it easier to integrate the conveyor into existing systems. Limited reverse operation is
available on request. Knife edges can be configured on both the infeed and discharge end. Operation with
cleated belts is not possible with this version.
Technical data
Conveyor length L individual from 800 to 10000 mm
Conveyor width B 200 to 1200 mm (in 100 mm increments) others on request
Belt width B-15 mm from p. 98
Drive location left/right underneath
Drive and speed up to v=60 m/min p. 12
Stand and side rail from p. 286
Standard total load up to 150 kg p. 20
Standard distributed load up to 50 kg/m p. 20
58
2
GUF-P 2041
Belt Conveyors
Tails from
page 60