6
Lateral fastening example Face fastening example
210
Pneumatic Components
The following pneumatic components allow the
mk 2040.02 (40x80) and mk 2040.03 (80x80)
profiles to be used as a compressed air line,
eliminating the need to install additional components.
The system is designed for a maximum
pressure of 6 bar. ø 8.4 mm bores must be drilled
at the necessary locations to connect the components
in the profile slot. The B46.03.007 drilling
jig can be used to determine the exact positioning
of the bores, or the connection plate can be used
directly as a jig.
25 40 50 60
Hose connection
Ribbed washer ø 8.4, galv. steel, K111010017
Cylinder head screw M8x25, DIN 6912, D6912825
Flat seal A 53.01.0005
Threaded insert M8, 9S20K, K112030008
A flat seal is used to seal the connection when the
distributor or connection plate is fastened to the
profile’s face.
An O-ring is used to seal the connection when the
distributor plate is fastened to the profile slot. It fits
perfectly into a circular slot in the connection plate.
Installation Elements
For drilling jigs,
on page 346
Coupling G1/4" K502050700
Polyamide gasket G1/4" K502050351
Cylinder head screw M8x25 DIN 6912
D6912825
Distributor plate A1 G1/4"
53.00.0352, Al
Nut 1 ESD M8 34.01.0018
O-ring ø 12 x 2 K115010093
Accessory Components