349
11
Detail A è Page 114 Detail B è Page 263
Tension plug
B51.03.040
This connection requires a ø 10 mm through-bore
15 mm from the edge. Use the Series 40 drilling jig
B51.03.005. After you insert the bolt in the bore,
guide the tension plug into the profile’s face and
secure it by gently tightening the set screw. The
traverse can now be connected to another profile
in any position you wish.
Hinge 40-1/40-1
B46.01.010
A hinge is mounted between two profiles using
countersunk head screws and nuts that fit the particular
profiles series. The fastening accessories
you need are included in the set. The keys on the
hinge leaves ensure that the components are parallel.
Detail C è Page 258 Detail D è Page 267
Fence clip
mk 2544
Fence clips can be used to quickly mount welded
grids onto Series 40 profiles. You simply hammer
the clip into the profile slot. To adequately secure
the welded grid in the profile frame, the fence clips
should be a maximum of 200 mm from the corners
and 520 mm from each other.
Ball latch
B68.02.101 for 5 mm door gap and
B68.02.102 for 24 mm door gap
Ball latches are a simple and affordable option for
locking doors that do not require safety interlocking.
They are easily installed with screws and nuts.
Application Examples