359
11
Detail A
Detail B
Kanban Shelf – for Manual Product Removal
Each kanban system also uses kanban shelves that do not require constant restocking. Stocking from the
rear side was therefore not required. The shelf is for items that are used infrequently during the assembly
process, which are best stored in this shelf with plenty of storage space.
Detail A è Page 254 Detail B è Page 256
Captive fasteners
B34.01.003
The captive fasteners, together with a undercut
flanged button-head screw and ribbed washer, are
used to retrofit panelling into existing structures in
accordance with the Machinery Directive. The
panelling requires ø 9 mm bores at a distance of
10 to 15 mm from the profile frame.
Angle fasteners
This type of fastening is suitable for sheets
1.52 mm thick. The edge bending around the sheet
provides the necessary stiffness up to side lengths
of 1200 mm. For lengths greater than this, an additional
mk 2578 holder is required. The angles must
have an M8 thread on the side. A shim (07.01.0005)
is used to cover the oblong hole, and the sheets are
screwed on using flanged button-head screws.
Application Examples