Versamove standard modules
6
Features Tech. data
WT 2045 pallet
Aluminum surface plate (steel optional)
Locating bushings in surface plate for
positioning and turning pallets
PE slide rails (steel optional)
Integrated damping bumpers
Available in anti-static design as an option
Up to zu 40 kg
total load
Width: 240, 320,
400 mm
Length: 240, 320,
400 mm
FPF-P 2045 flat top chain conveyor
Suitable for accumulating operation
Curve module (minimum radius of
600 mm)
Curve angle 90° and 180°
Automatic chain tensioning included
Available in anti-static design as an option
Length: 500-6000 mm
Section load: 70 kg/m
Total load: 400 kg
Speeds: 6; 9; 12; 15 and
18 m/min
ZRF-P 2045 timing belt conveyor
Conditionally suitable for accumulating
operation
Especially well-suited for indexing
operation
High acceleration
Reversing operation possible
Low-maintenance
Available in anti-static design as an option
Length: 500-6000 mm
Section load: 60 kg/m
Total load: 200 kg
Speeds: 6; 9; 12; 15 and
18 m/min
PAR/PAZ coating
SRF-P 2045 accumulating roller conveyor
Especially well-suited for accumulating
operation
High operating temperatures
Accumulating rollers available in steel and
plastic
Automatic chain tensioning included
Available in anti-static design as an option
Length: 500-6000 mm
Section load: 80 kg/m
Total load: 700 kg
Speeds: 6; 9; 12; 15 and
18 m/min
HQZ 2045 lift and transfer
Low overall height
Pneumatic lifting movement
Guidance using linear bearings and
guide rods
Manual belt tensioning included
Inductive position detection
(reed switches optional)
Loads up to 40 kg
Speeds: 6; 9; 12; 15 and
18 m/min
Stroke: 20 mm
(at pallet width 240 mm,
stroke: 25 mm)