The company rebuy established a new and complete pilot system for the automated inspection and processing of smartphones. mk supplied the conveyor lines and workstations.
Round battery cells are fed into the assembly process for the production of battery packs and must be transported position-oriented to another level. The goods to be transported should flow smoothly, i.e. should be transported without a pallet, with maximum throughput and high process reliability.
Task
During the production of small gear parts, a conveyor must transport the parts from production to the inspection device. A part must be fed every ten seconds. The system runs in 2-shift operation. In order to fit within the existing system, the conveyor must convey the products around a curve…
Customer requirement
A manufacturer of hollow plastic objects needs a cooling line for plastic bottles. The bottles are ejected from the blow moulding machine in two lines and must then be converged on a conveyor line for feeding to the subsequent cutting machine and inspection. The bottles must be…
Task
Unfolded shoe boxes first need to be sprayed with adhesive and then folded in the next machine in a packaging plant. A conveyor must transport the cartons past the spraying units, around a curve and to the box folding machine. The system is designed to process up to 115 cartons per minute,…
Task
Bottles need to be discharged in a bottling line for consumer goods. They must be briefly buffered on the conveyor before they are manually processed. Work surfaces directly on the conveyor were required to allow workers to pack the bottles into boxes.
mk solution
The solution features the…
Task
Cardboard slip sheets must be removed from a depalletising machine. The slip sheets are both stacked on the conveyor and removed on the discharge end manually. During this process, they must be conveyed to a height of approx. 1,600 mm. The conveyor must be indexing and run in three-shift…
Problem definition
During the production of chocolate bars, the bars are to be transported from the packaging machine to a downstream conveyor. There is only very limited space available. A height difference of around 480 mm and a 90° curve must be circumnavigated. During the vertical ascent, the…