Length L up to 1000 up to 2000 up to 3000 up to 4000 up to 5000 up to 6000 over 6000
Tolerance h1 0.7 1.3 1.8 2.2 2.6 3 3.5
15
2
Straightness Tolerance*
The straightness tolerance h1 must not exceed the
values in the table for a given length; the deviation
must also not exceed 0.3 mm over a distance of
300 mm.
Tolerances for Cut Profiles*
Length L up to 500 up to 1000 up to 2000 up to 6000
Tolerance ± 0.5 ± 0.8 ± 1.2 ± 2.0
Width W up to 50 up to 100 up to 200 up to 300
Angular tolerance D 0.2 mm 0.4 mm 0.8 mm 1.2 mm
If the length tolerances above are insufficient, optional machining of the profile face is also available.
L
W
H
Twisting
Width W Twisting tolerance H for lengths L
over up to up to 1000 over 1000
up to 2000
over 2000
up to 3000
over 3000
up to 4000
over 4000
up to 5000
over 5000
up to 6000 over 6000
— 25 1.0 1.5 1.5 2.0 2.0 2.0
As agreed
25 50 1.0 1.2 1.5 1.8 2.0 2.0
50 75 1.0 1.2 1.2 1.5 2.0 2.0
75 100 1.0 1.2 1.5 2.0 2.2 2.5
100 125 1.0 1.5 1.8 2.2 2.5 3.0
125 150 1.2 1.5 1.8 2.2 2.5 3.0
150 200 1.5 1.8 2.2 2.6 3.0 3.5
200 300 1.8 2.5 3.0 3.5 4.0 4.5
Profiles
* According to DIN 171615 or DIN EN 12020