21
2
α
a
Rmin
Rmin
Curved Profiles
Certain profiles can be bent to a desired radius.
Profiles with this bending option are marked with
a symbol, with the number indicating the minimum
inner radius (Rmin) in millimetres.
Information required for ordering
Profile ID number
Inner radius R
Angle a
... up to
Non-square profiles can only be bent along the
narrow side of the profile, i.e. in the upright orientation,
as shown here. Bending will deform the cross
sections slightly, so slot widths may be reduced.
The following profiles can be bent
mk 2025.01 (25x25) on page 42
mk 2025.02 (25x50) on page 43
mk 2025.03 (25x100) on page 43
mk 2025.04 (25x150) on page 43
mk 2025.22 on page 44
mk 2025.41 (20x40) on page 46
mk 2025.42 (20x80) on page 46
mk 2025.43 (20x120) on page 47
mk 2025.44 (20x160) on page 47
mk 2025.31 (25x25) on page 48
mk 2025.35 (25x25) on page 48
mk 2025.32 (25x50) on page 49
mk 2025.36 (25x50) on page 49
mk 2040.01 (40x40) on page 51
mk 2040.02 (40x80) on page 53
mk 2001 on page 63
mk 2000 (50x50) on page 63
mk 2014 (50x50) light duty on page 63
mk 2023 (50x75) on page 64
mk 2004 (50x100) on page 64
Profiles