15
1
B – Lower Belt Drives
Drive Location
The drive location determines how and where the
drive, including the motor, is installed. You can choose
to position the drive on the infeed or discharge end,
above or below the conveyor frame, on the left or on
the right.
Motor Orientation
As shown in the figures, the motor orientation can vary
between 0°, 90°, 180° and 270°. If the customer does
not specify the drive location, the drive is delivered
on
the discharge end, on the left side, below the conveyor
and with a motor orientation of 0°.
Bottom Top
Conveying direction
Discharge end Infeed end
BA
Lower belt drive without motor
Drive unit variably mounted underneath the
conveyor, enables connection on a conveyor
with motor for parallel operation
BC
Lower belt drive, standard
Possibility of limited reverse operation and configuration
of knife edges, at both the infeed end and
discharge end
BF
Lower belt drive, direct
Compact and low-maintenance drive version with
a motor that is fitted directly on the drive shaft
C – Internal Drives
CA
Drum motor
Maintenance-free and compact drive version
without exterior interference contour with a
drive version as a driving roll
The drive versions are shown on the belt conveyor in the example
Right
Left
Information on Conveyor Technology