Selecting a Roller Conveyor
Dimensions – Technical Data
Conveyor
system
Selecting the Roller Type Based on the Width and Load per Roller
Type 47/48/49/61 (ø 50 steel)
Roller Spacing Based on the Product Length (LP)
250
7
LP
max. LP/3
m
p
Recommendation
4 rollers under the product
≙ distribution p = 150 mm with LP = 600 mm
Runs very smoothly
Can work with uneven loads
Minimum
3 rollers under the product
≙ distribution p = 200 mm with LP = 600 mm
Limit is m = 100 kg with 33 kg/roll
Suitable for m = 50 kg with central centre of gravity for the load
Type 43/44
(ø 50, plastic)
Type 59
(ø 40, plastic)
Conveyor width (approx.)
Roller installation length (EL)
Type 58
(ø 20, plastic)
Type 45/46 (ø 50 steel)
Type 51/52/55/56 (ø 50 steel)
Roller Conveyors
Conveyor
widths
mm
Conveyor
lengths
mm
Total load*
as standard,
up to kg
Speed
up to
m/min
ø of tails
mm
Reverse
operation
Accumulated
operation
Cycling
operation
Gravity roller conveyors
RBS-P 2065/2066 150–1050 200–5000** 400 30 approx. 90 • • •
RBS-P 2255 150–1050 500–10000** 400 30 approx. 90 • • •
Roller conveyor with tangential chain drive
RBT-P 2255 320–720 500–10000 400 30 approx. 90 • • •
Roller conveyor with drive roller
RBM-P 2255 480–680 500–10000 400 70 approx. 90 • • •
* Usual load limits that may be exceeded based on the configuration and influencing factors.
** Length refers to one roller conveyor segment (single piece). With the joints, there is no limit on the
lengths that are possible.
Rollers, see from
page 276