90° and 180° Rolling Curve
The rolling curved tail and rotating plastic washers
on the inside of the curve significantly reduce the
amount of friction that occurs in the conveyor system.
This feature enables higher speeds, longer conveying
paths and higher loads to be achieved.
90°
Width B Chain width B1 B2 R Item no.
100 mm 82.5 mm 500 mm 200 mm B36.00.428*
130 mm 114.3 mm 530 mm 200 mm B36.00.429*
180°
Width B Chain width B1 B2 R Item no.
100 mm 82.5 mm 500 mm 200 mm B36.00.430*
130 mm 114.3 mm 530 mm 200 mm B36.00.431*
243
6
a
Sliding Curve
The chain is guided along the entire curve area in a
high-quality PE 1000 wear strip. The dimensions of
the wear strip ensure that the chain runs safely. This
results in long conveyor service life. Sliding curves
are primarily used in short conveyor systems with
minimal loads and low speeds.
Width B Chain width B1 R Item no.
100 mm 82.5 mm 300 mm B36.00.416*
100 mm 82.5 mm 500 mm B36.00.414*
130 mm 114.3 mm 300 mm B36.00.417*
130 mm 114.3 mm 610 mm B36.00.415*
*Assemblies with connecting elements, without a chain
and without wear strips
Flat Top Chain Conveyors