BC – Lower belt drive, standard B20.10.356
The compact conveyor frame design and the ability to freely select the drive position over the entire
length of the conveyor make it easier to integrate the conveyor into existing systems. The timing belt
pulley combined with the snub rollers ensures excellent transmission of the motor power. Since the timing
belt returns within the profile, welded-on cams cannot be used. The ZRF-P 2040 should be used for this
purpose.
Technical data
Conveyor length L individual from 700 to 6000 mm
Conveyor width B 200 to 1000 mm
Timing belt width 32 mm p. 172
Drive location left/right underneath
Drive and speed up to 60 m/min, higher on request p. 12
Stand and side rail from p. 286
Standard total load up to 250 kg higher on
166
4
ø(DW) 89
ø(DW) 89
ø(DW) 89
ZRF-P 2010
For information about wear strip options, see page 168
Timing Belt Conveyors
request
Standard distributed load up to 100 kg/m