The All-Rounder of the Workpiece Carrier Systems
Versamove plus is a versatile workpiece carrier transfer system with a high load capacity of up to 150 kg/m and 100 kg/workpiece carrier. The system transports workpieces of any dimensions within the system limits of 400 x 400 mm to 800 x 1040 mm. Product-specific workpiece fixtures are implemented according to customer specifications.
- Aluminium support plate (steel optional)
- Positioning sockets in the support plate for positioning and rotating the workpiece carrier
- PE wear strips (antistatic optional)
- Integrated bumper
- Total load up to 100 kg
- Width: 400 bis 800 mm
- Length: 400-1040 mm
- Suitable for limited accumulated operation
- Ideal for cycling operation
- High acceleration
- Reverse operation possible
- Low maintenance
- Antistatic design optional
- Length: 500-6000 mm
- Total load 250 kg, distributed load 100 kg/m
- Speeds up to 60 m/min
- PAR/PAZ coating
- Very sturdy
- High operating temperatures
- Suitable for even dirty environments
- Reverse operation possible
- Antistatic design optional
- Length: 500-10000 mm
- Total load 1000 kg, distributed load 150 kg/m
- Speeds up to 30 m/min
- Ideal for accumulated operation
- High operating temperatures
- Accumulating rollers available in steel and plastic
- Antistatic design optional
- Length: 500-10000 mm
- Total load 750 kg, distributed load 150 kg/m
- Speeds up to 30 m/min
- Low height
- Pneumatic lifting motion
- Guided by recirculating ball bearing guides
- Manual tensioning device included
- Inductive position detection
- Loads up to 100 kg
- Speeds of 6; 9; 12; 15 and 18 m/min
- Stroke: 25 mm
- Low height
- Custom rotation speeds
- Pneumatic lifting and turning motion
- Guided by linear roller bearings and guide rods
- Inductive position detection
- Loads up to 100 kg
- 90° and 180° rotation
- Damped and undamped stopping
- Electrical or inductive stopper detection possible
- Single or dual acting
- Direct mounting on the conveyor frame (no additional holders required)
- Permissible load depends on the stopper variant and the conveying speed
- Positioning in the X, Y and Z directions
- Positioning sockets in the workpiece carrier’s support plate for positioning
- Pneumatic lifting and positioning
- Repeatability: ± 0,1 mm
- Cylinder stroke: 40 mm
Contact
For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-0 or using the contact form below.