Accumulating double-line conveyor system
Accumulating double-line workpiece carrier circulation system SPU 2040
The accumulating double-line conveyor system is ideal for feeding or discharging processing cells. This system is also suitable for linking machines or assembly lines. The two interconnected single-line systems are operating in parallel, for example to transport large or heavy products. The workpieces on the workpiece carriers are fed to the upper transport level by means of a flat top chain. After the workpiece has been removed, the empty workpiece carriers are picked up in the tail and then conveyed back below the transport level. This means they are available again at the start of the production line to be loaded with new workpieces. The system can stop, stow and separate the workpiece carriers, which is ideal for automated processing or for compensating for different cycle times.
Price on inquiry
Dimensions LxWxH: 5000x1200x1060 mm
Workpiece carrier: 750x160 mm
Total load: 10kg/workpiece carrier (incl. components and workpiece)
Workplace carrier replacement time: approx. 17 s
Electrical voltage: 480 V, 60 Hz
Compressed air supply: 5 bar
System environment: Dry (air humidity < 60%), not abrasive
Temperature range: +5° C to +40° C
including sensors, mounted on brackets and tested
without electrical installation / control
without pneumatic installation
with one-sided protective housing
1 workpiece carrier circulation system SPU 2040
Belt length: Approx. 4000 mm
Conveyor width: 2x 114 mm (flat top width)
Total width: 1000 mm
Flat top width: 114.3 mm
Conveyor height: 1050 (upper edge of workpiece carrier)
Drive location: AC head drive right
Motor orientation: 0°
Drive: 0.37 kW, 230/400 V, 50 Hz
Make: SEW asynchronous gearmotor
Total load: 100 kg
Power transmission: Chain drive
Speed: 9 m/min at 50 Hz
Flat top chain: S 815 TAB-K450, tensioning device integrated in the tail
10 workpiece carriers
Aluminium profile supporting plate
Lateral guide bush for centring unit
The workpiece carrier returns to the lower run of the conveyor
3 separation units
Pneumatically operated
Undamped stoppers from Asutec
Separation in upper and lower run
1 centring units
Pneumatically operated with lateral connection to the conveyor frame
Incl. stop function
Design: One-sided cylinder clamping
Positioning accuracy: +/- 0.2 mm
Underframe
mk profile system consisting of a stand with a levelling foot and retaining angle for floor fastening
Adjustments made using the spindle in the levelling foot +/- 20 mm
Contact
For custom requests, please contact our technical service department at service(at)mk-group.com or using the contact form below.