Magnet-S-Conveyor

Problem definition
Linking a production system for brake shoes. Continuous transport of ferromagnetic workpieces from a transfer height of 1,000 mm to a transport elevation of approx. 2,500 mm. During transport, the products must not change their position. The conveyor must be adjusted to meet the complex routing and installation requirements.

mk Solution
S-conveyor based on the GUF-P 2000 with central BC drive and curved profiles, using a radius of 1,200 mm. Permanent magnets are integrated into the belt body and guarantee the proper orientation of the suspended transport even through curved segments.

Benefit to the customer

  • Individual customized solution, regardless of the complexity of the conveyor routing
  • Expanding the products spectrum by adding curved conveyors and magnet conveyors
  • Process safe transfer of the workpiece without delay

 

Products

> Belt conveyor GUF-P 2000
> Aluminum profile series 40

  • S-Förderer individuell angepasst an Einbausituation

  • Überkopf-Transport durch Einsatz von Magneten

  • Gurtführung über Stützrollen im Bogensegment