Problem definition
Measuring chambers are required for integration in a semi-automated production plant. The chambers must be completely enclosed and blacked out for the use of 3D camera systems. The products to be inspected are to be transferred to the chamber using automated guided vehicle systems…
Intelligent software independently learns to detect, distinguish between and rate optical defects. The system described inspects small lacquered parts in a cycle. It also automates the quality assurance process in the production of small parts. The fact that the software can even see the faults is…
Problem definition
A process and a system for coating metal foils needed to be developed for a research and development project. The metal foils are used in the production of lithium-ion batteries. After coating, the foil must be dried before it can be calendered and rewound into a coil. The…
Problem definition
In the production of longitudinal and cross beams, the production systems, the packaging robots and a station for manual tasks need to be interlinked. Positioning accuracy of +- 0.2 mm is required at the stations. Both longitudinal and cross beams are produced on the line, and the…
Two machining stations in a production process for cast parts need to be interlinked. The upstream and downstream machines have different cycle times. The interlink needs to restore the system’s autonomy. Two different types are produced on the line simultaneously. They are…
Problem definition
An interlink is required for a production process in the manufacture of titanium screws. Five lathes need to be interlinked with two thread whirling machines. Different screw types need to be processed. The lathes have a different cycle time than the thread whirling machines. The…
Problem definition
A hood for extracting dust particles is required for the production of laboratory equipment. The contour as well as the inputs and outputs are specified by the customer. The hood must be equipped with a suction nozzle for an extraction system provided by the customer. It must also…
Problem definition
A protective device guard built according to a customer-supplied drawing is required for the packaging area of a toothbrush production operation. The toothbrushes are already in their primary packaging, so there are no sanitary requirements. The protective device guard is located…
Problem definition
The customer sought to simulate the entire logistics process for consumer goods for use in a training centre. Using beverage crates as an example, the customer wanted to display all the various stations, from manufacture of the goods, to transport and storage, all the way to the…
Problem definition
In a production system for industrial filters, multiple, separate machining stations need to be interlinked. The interlinks should be as compact as possible. Products of different sizes need to be processed with minimal retooling times. The machine tools should also be able to…