Problem definition
In a production process for pharmaceutical products, glass bottles are to be supplied to a packaging station. The interlinking system is to transport 180 bottles per minute and should contain a sample separator. Both the side rail and the separator must be configurable to…
Problem definition
A foil wrapping machine for manufacturing delivery note pockets with glued-on hook-and-loop fasteners is to be fully retrofitted and renovated. The machine processes 80 m of foil or silicone paper fully automatically to produce 1,000 delivery note pockets per minute. The system’s…
Problem definition
In a production process for ball bearings, ball bearing races of various sizes are manually positioned at the corresponding processing stations. Since the cycle times vary and to prevent the worker from constantly having to set and remove parts, a simple and cost-effective…
Assignment
The client requires a fully-automated assembly line that will assemble, test, label and store multi-component sanitary fittings. The product comprises a total of 14 separate plastic parts, which have high manufacturing tolerances. In addition to this, both the plant and the control system…
Multiple machining stations needed to be interlinked for the production of electric motors for an electric sport utility vehicle. The stations needed to be interlinked across multiple levels. Lifts for lifting, lowering and turning are used to transport the pallets to the various…
Problem definition
A horizontal pallet recirculation system was needed for the production of electric motors for an electric sport utility vehicle. Together the workpiece and pallet weigh about 100 kg per pallet, which means a total load of 160 kg per meter of conveying path. The system needs to be…
Problem definition
Two machines in a pipe machining process need to be interlinked. Trimmed pipe pieces need to be transported to the next machine where they can be stamped. The pipe pieces are oily and have sharp edges. The interlink system must open to allow vehicles and transport boxes to pass…
Problem definition
In the production of longitudinal and cross beams, the production systems, the packaging robots and a station for manual tasks need to be interlinked. Positioning accuracy of +- 0.2 mm is required at the stations. Both longitudinal and cross beams are produced on the line, and the…
Two machining stations in a production process for cast parts need to be interlinked. The upstream and downstream machines have different cycle times. The interlink needs to restore the system’s autonomy. Two different types are produced on the line simultaneously. They are…
Problem definition
In the production of titanium screws, a handling solution needs to lift the baskets containing the screws from the main conveyor life to the buffer conveyor or tip the containers into a funnel. The solution needs to process different screw types in no particular order and be able…