|Type of goods||Boxes, crates, pallets, workpiece carriers|
|Type of ways||Straight & incline up to 20°|
|Length||individual 500-10000 mm|
|Speed||up to 30 m/min|
|Maximum load||up to 500 kg|
|Chain||1/2“ single or duplex|
|Drive versions||AA, AC, AF, AS, C, BF|
|Belt body profile||mk 2010|
The KTF-P 2010 chain conveyor is a conveyor system for moderate loads and is ideally suited for transporting workpiece carriers. Its large selection of drives makes it extremely flexible, and it is usually used as the basis for constructing transfer lines. It is available as a single, dual or multiple line system with either a simple roller chain or a duplex roller chain for higher loads and a larger support surface.
The various chains and wear strip guides allow the workpiece to be optimally placed on the conveyor, while their excellent anti-frictional properties make them extremely low maintenance and sturdy.
Longitudinal slots in the mk 2010 profile beam provide flexible options for connecting struts, guides, sensors and components from the mk profile system.
Like all chain conveyors, the system can be equipped with an optional tensioning device and continuous lubrication device.
The wear and guide strips that support and guide the timing belt are made from ultra-high-molecular weight polyethylene (PE-UHMW), which provides a low friction coefficient with excellent wear characteristics over a wide temperature range (up to 65° C over extended periods).
For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-0 or using the contact form below.