Problem definition
In the production of titanium screws, a handling solution needs to lift the baskets containing the screws from the main conveyor life to the buffer conveyor or tip the containers into a funnel. The solution needs to process different screw types in no particular order and be able…
Problem definition
During the production of titanium screws, the screws are expelled from the lathes and fill baskets made from perforated VA steel sheets. The screws that fall into the basket need to be counted. A lifting unit is also needed to transport the baskets to the main conveyor line at a…
Problem definition
An interlink is required for a production process in the manufacture of titanium screws. Five lathes need to be interlinked with two thread whirling machines. Different screw types need to be processed. The lathes have a different cycle time than the thread whirling machines. The…
Problem definition
Two machining stations in a plastic canister production process need to be interlinked. The solution has to cope with inconvenient spatial constraints: Empty canisters need to be conveyed along a curve and past another machine so that they can be brought back to the original feed…
Problem definition
Food production application requires automated interlinking of multiple production steps and circulation of pallets. Multiple pallets with relatively high loads need to be transported. The conveyor systems need to be able to buffer the pallets. Pass-through clearances need to be…
Problem definition
Stacked pallets need to be dynamically buffered in a food production application. A storage capacity of about 500 pallets is required, which corresponds to about 30,000 products.
mk Solution
Buffer consisting of ZRF-P 2040.02 timing belt conveyors on two levels. The timing belt…
Stacked pallets in a food production application need to be lifted so that they can be buffered on multiple levels. Pallet stacks weighing 50 kg each need to be transported. The stroke length is approximately 3300 mm. The machine needs to lift and lower but also convey in order…
Problem definition
In an application for producing plastic fuel tanks, the blow-moulded tanks need to be fed into a multi-level storage system, where they are allowed to cool. The cycle must take a certain amount of time so that the tanks have sufficient time to cool. The tanks also need to be…
Problem definition
Replacement of a simple slide with a system that gently handles blow-molded parts, which in some cases are still plastiline, with automation, and transports them off. The blow-molded parts must be vertically transferred to the discharge gripper of the blow molding system.…
Problem definition
In order to link a manufacturing process, during which a machine that is integrated downstream, functions at a slower speed but operates longer, a transfer system is required using a buffer zone for 40 pallets arranged in 5 levels and capable of transporting a total load of 10…