The workpiece carrier circulation system with lift and transfer unit is used to link machines, to supply or discharge processing cells or is used as an assembly line. For example, the workpiece carrier circulation system can be used to link together two robot processing cells. It is particularly suitable for medium to heavy loads. Thanks to its impressive positioning accuracy, the workpiece carriers can be loaded and unloaded by robots, for example. Its modular design also means the system can be expanded very flexibly or adapted to existing systems.
Dimensions LxWxH: 4595x1295x1190 mm
Workpiece carrier: 240x400 mm
Total load: 6kg/workpiece carrier (incl. components and workpiece)
Electrical voltage: 230/400 V, 50 Hz; 24 VDC; degree of protection IP 54
Compressed air supply: 6 bar
System environment: Dry (air humidity < 60%), not abrasive
Temperature range: +5° C to +40° C
including sensors, mounted on brackets and tested
without electrical installation / control
without pneumatic installation
without protective housing
10 workpiece carriers WT 2045
400x240x28 mm
Aluminium base plate (8 mm)
Plastic runners
Centring bush
Damping element
Preparation for initiator detection
Drilling template for components provided by the customer
1 timing belt conveyor ZRF-P 2045 AF
Conveyor length: 4500 mm
Workpiece carrier width: 240 mm
Timing belt width: 25 mm
Conveyor height: 1120 mm
Drive location: AF head drive left
Motor orientation: 90°
Drive: Approx. 0.18 kW, 230/400 V, 50 Hz
Make: SEW asynchronous gearmotor
Timing belt: T10 PAZ-PAR, voltage integrated in drive
Total load: 40 kg
Power transmission: Direct
Speed: 15 m/min at 50 Hz
Side rail: Type B – integrated in wear strip
1 timing belt conveyor ZRF-P 2045 AF
Conveyor length: 2600 mm
Workpiece carrier width: 240 mm
Timing belt width: 25 mm
Conveyor height to machine: 210 mm
Drive location: AF head drive left
Motor orientation: 0°
Drive: Approx. 0.18 kW, 230/400 V, 50 Hz
Make: SEW asynchronous gearmotor
Timing belt: T10 PAZ-PAR, voltage integrated in drive
Total load: 40 kg
Power transmission: Direct
Speed: 15 m/min at 50 Hz
Side rail: Type B – integrated in wear strip
1 timing belt conveyor ZRF-P 2045 AF
Conveyor length: 1900 mm
Workpiece carrier width: 240 mm
Timing belt width: 25 mm
Conveyor height to machine: 210 mm
Drive location: AF head drive left
Motor orientation: 90°
Drive: Approx. 0.18 kW, 230/400 V, 50 Hz
Make: SEW asynchronous gearmotor
Timing belt: T10 PAZ-PAR, voltage integrated in drive
Total load: 40 kg
Power transmission: Direct
Speed: 15 m/min at 50 Hz
Side rail: Type B – integrated in wear strip
2 timing belt conveyor ZRF-P 2045 AF
Conveyor length: 700 mm
Workpiece carrier width: 400 mm
Timing belt width: 25 mm
Conveyor height: 1130 mm
Drive location: AF head drive (left/right)
Motor orientation: 0°
Drive: Approx. 0.18 kW, 230/400 V, 50 Hz
Make: SEW asynchronous gearmotor
Timing belt: T10 PAZ-PAR, voltage integrated in drive
Total load: 15 kg
Power transmission: Direct
Speed: 12 m/min at 50 Hz
Side rail: Type B – integrated in wear strip
4 lifting cross conveyors HQZ 2045
Drive version: Direct drive
Motor orientation: 0°/90°
Drive: Approx. 0.18kW, 230/400 V, 50Hz
Make: SEW asynchronous gearmotor
Total load: 6 kg
Timing belt: T5 PU, wear-resistant, voltage integrated in the drive
Timing belt width: 20 mm
Stroke: 20 mm, detection via reed contact
Conveyor speed: 12 m/min at 50Hz
Cover: VA sheet metal
2 positioning units PE 2045
Positioning: In X, Y and Z direction
Stroke: 30 mm, pneumatic, detection via reed contact
Repeat accuracy: +/- 0.2 mm
7 stop/separation units
Design: SD60, pneumatic stopper from Asutec
Position detection via reed contact
Control: Single acting, depressurised
Stand system
Made using mk profile system with levelling feet and retaining angles for floor fastening.
Set the conveyor level using the spindles in the levelling foot (+/- 20 mm).
For custom requests, please contact our technical service department at service(at)mk-group.com or using the contact form below.