Problem definition
Two machining stations in a plastic canister production process need to be interlinked. The solution has to cope with inconvenient spatial constraints: Empty canisters need to be conveyed along a curve and past another machine so that they can be brought back to the original feed…
Problem definition
In an application for producing plastic fuel tanks, the blow-moulded tanks need to be fed into a multi-level storage system, where they are allowed to cool. The cycle must take a certain amount of time so that the tanks have sufficient time to cool. The tanks also need to be…
Problem definition
An existing interlink for transferring pallets in a food production application needs to be expanded. Capacities and production need to be increased from about 500 pallets to around 1500 pallets. This corresponds to approximately 100,000 products in the final expansion stage.…
Problem definition
In a food production application, stacked pallets need to be rotated by 90° and then further transported in the same direction so that they can be transferred to a buffer system. The pallets have a length/width ratio of 1 : 2.5, which is unfavourable for rotary motion. One pallet…
Stacked pallets in a food production application need to be lifted so that they can be buffered on multiple levels. Pallet stacks weighing 50 kg each need to be transported. The stroke length is approximately 3300 mm. The machine needs to lift and lower but also convey in order…
Problem definition
Stacked pallets need to be dynamically buffered in a food production application. A storage capacity of about 500 pallets is required, which corresponds to about 30,000 products.
mk Solution
Buffer consisting of ZRF-P 2040.02 timing belt conveyors on two levels. The timing belt…
Problem definition
Food production application requires automated interlinking of multiple production steps and circulation of pallets. Multiple pallets with relatively high loads need to be transported. The conveyor systems need to be able to buffer the pallets. Pass-through clearances need to be…
Problem definition
In order to link a manufacturing process, during which a machine that is integrated downstream, functions at a slower speed but operates longer, a transfer system is required using a buffer zone for 40 pallets arranged in 5 levels and capable of transporting a total load of 10…
Design, construction and start-up of a semi-automated workstation interlink system for rotating assemblies for stretching synthetic fibres. The workpiece carriers are provided in three different variants for the rotors, the housings and the finished assemblies. Part of the…
Problem definition
Replacement of a simple slide with a system that gently handles blow-molded parts, which in some cases are still plastiline, with automation, and transports them off. The blow-molded parts must be vertically transferred to the discharge gripper of the blow molding system.…