Problem definition
For an application in the production of non-woven strips, cut sections of non-woven fabric need to be transported from one machining station to the next. The material is very thin and light. The system needs to run at a high speed of 140 m/min. The strips must be transferred from…
Problem definition
A hood for extracting dust particles is required for the production of laboratory equipment. The contour as well as the inputs and outputs are specified by the customer. The hood must be equipped with a suction nozzle for an extraction system provided by the customer. It must also…
Problem definition
Interlinking of multiple workstations with different cycle or changeover times using cost-effective and dynamic feeding, buffering, positioning and separating of workpiece carriers.
mk Solution
The SPU 2040 accumulating pallet recirculation system allows for acyclic operation…
Problem definition
The customer sought to simulate the entire logistics process for consumer goods for use in a training centre. Using beverage crates as an example, the customer wanted to display all the various stations, from manufacture of the goods, to transport and storage, all the way to the…
Problem definition
During the machining of sheet metal parts for home appliances, sheets are pressed to shape. The pressed sheets are transported away from the press. A worker removes the sheets and places them in a transport box for further processing. Previously the worker had to remove each sheet…
Problem definition
An automated cleaning station with an immersion bath is required in an assembly line for metal spindles. The spindles are loaded onto the conveyor by a customer-provided handling system and then transported into the cleaning solution, where they are rinsed. Any fluid and dirt…
Two production steps in the manufacture of shafts for spinning machines need to be interlinked. The customer requires a compact workpiece carrier circulation system for round, upright products. A worker loads the workpiece carriers, which are to be conveyed around 90° to the next…
Problem definition
Food production application requires automated interlinking of multiple production steps and circulation of pallets. Multiple pallets with relatively high loads need to be transported. The conveyor systems need to be able to buffer the pallets. Pass-through clearances need to be…
Problem definition
Stacked pallets need to be dynamically buffered in a food production application. A storage capacity of about 500 pallets is required, which corresponds to about 30,000 products.
mk Solution
Buffer consisting of ZRF-P 2040.02 timing belt conveyors on two levels. The timing belt…
Stacked pallets in a food production application need to be lifted so that they can be buffered on multiple levels. Pallet stacks weighing 50 kg each need to be transported. The stroke length is approximately 3300 mm. The machine needs to lift and lower but also convey in order…
