|Type of goods
|Boxes, crates, pallets, workpiece carriers
|Type of ways
|Straight & incline up to 20°
|individual 300-2000 mm
|100, 125, 150, 175, 200 and 250 mm
|up to 15 m/min
|up to 15 kg
|Discharge end left/right below
The DGF-P 2001 transport system is specially designed for transporting workpiece carriers. Its very small idler rollers allow it to transport even short workpiece carriers, for example those used in assembly systems in the electronics industry. A roller on the lower run side of the tail is responsible for the belt tension. This ensures that the conveyor maintains a fixed installation length. The belt runs entirely atop wear strips, which allows for a maximum weight of 15 kg per section. mk delivers the DGF-P 2001 with aluminium workpiece carriers as standard. The pallets can therefore be machined according to customer requirements.
The standard workpiece carriers on the DGF-P 2001 transport system are made from aluminium. The pallet width is always determined by the dimensions of the conveyor system (W minus 11 mm). The minimum length is 90 mm. Alternative workpiece carrier materials can also be used depending on the product to be transported. On request, we will be happy to design workpiece carriers for your particular application or manufacture them according to your drawing.
For custom requests, please contact our technical sales department at info(at)mk-group.com, by phone at +49 2284598-0 or using the contact form below.