Task
A manufacturer of X-ray systems for the food and aviation industries is developing a new system which requires a conveyor that can accommodate X-ray plates. The material to be conveyed, in this case large fish, must be X-rayed on the conveyor as it passes through the system and then conveyed…
Definition of the task
The customer produces wine gums. The transport packaging – that is, the boxes for the wine gums – are to be printed in the system so that they can then be stacked on pallets. The boxes each weigh a maximum of 9 kg. They need to be conveyed and rotated by 90°, from lengthwise…
Task
Glass vials must be stored and buffered after being filled for a pharmaceutical manufacturer. The vials must be separated during an additional step and then transferred to the line prior to being fed for sealing, labelling and scanning. Since the vials have been filled, but not yet sealed,…
Problem definition
During the production of chocolate bars, the bars are to be transported from the packaging machine to a downstream conveyor. There is only very limited space available. A height difference of around 480 mm and a 90° curve must be circumnavigated. During the vertical ascent, the…
Problem definition
A car manufacturer wants to optimise the recycling process in the outfeed of a sheet metal punch press. Aluminium scrap parts must be separated from steel scrap parts and sorted by type. The sheet metal parts should be transported on a belt conveyor with a cut-resistant belt and…
Problem definition
In a confectionery production department, packaged chocolates need to be separated upon exiting the individual packaging unit and conveyed to the repackaging process. The conveyor unit needs to be mobile in design so that it can be used on different production lines. In addition,…
Problem definition
In a production process for pharmaceutical products, glass bottles are to be supplied to a packaging station. The interlinking system is to transport 180 bottles per minute and should contain a sample separator. Both the side rail and the separator must be configurable to…
Problem definition
In a production process for ball bearings, ball bearing races of various sizes are manually positioned at the corresponding processing stations. Since the cycle times vary and to prevent the worker from constantly having to set and remove parts, a simple and cost-effective…
Assignment
The client requires a fully-automated assembly line that will assemble, test, label and store multi-component sanitary fittings. The product comprises a total of 14 separate plastic parts, which have high manufacturing tolerances. In addition to this, both the plant and the control system…
Multiple machining stations needed to be interlinked for the production of electric motors for an electric sport utility vehicle. The stations needed to be interlinked across multiple levels. Lifts for lifting, lowering and turning are used to transport the pallets to the various…