mk supports innovations in the machine and system construction sector, from the prototype all the way to standardised production. Our experts develop and produce custom-tailored solutions for all sorts of production and supply chain applications – wherever transfer technology needs to be perfectly integrated into your systems.
A production line requires an infeed conveyor for assembly stations. The workers process the products continuously. In order to achieve the required throughput, several assembly stations are built next to each other. As a result, the belt conveyor has to be particularly long.
A manufacturer of office supplies is looking to retrofit its outdated production line for cardboard folders. It wants to completely overhaul the system – in terms of both technology and appearance.
A mechanical engineer needs a protective housing for a cutting production machine. Since the machine is used to grind brake linings, the housing should reduce the level of noise in the production hall as well as the level of dirt.
A protective housing is required for an 18-m long strip rolling line for the production of cold-rolled wire. The purpose of the housing is to protect the surrounding area from oil mist generated during the process, therefore it needs to be impervious. Moreover, it is to serve as a key distinguishing…
Problem definition
In a metalworking application, round stamped parts in various formats need to be transported from one machine tool to the next. The interlink needs to bridge a slight height difference. The parts must be conveyed at 90°, then straight ahead for a section, and then at 90° again.…
A systems manufacturer who builds laser, clamping and automation systems needs protective enclosures to safely house its machines. This requires enclosures which are similar, but with slightly different dimensions. The enclosures must be opaque, easy to assemble and the customer’s technology must be…
Task
mk must deliver a large number of conveyors to a longtime customer in a short time frame. The conveyors are needed for a plant that must produce up to 100 respirator masks per minute in a fully automatic process. As the demand for such plants is extremely high due to the spread of the…
Task
Cardboard slip sheets must be removed from a depalletising machine. The slip sheets are both stacked on the conveyor and removed on the discharge end manually. During this process, they must be conveyed to a height of approx. 1,600 mm. The conveyor must be indexing and run in three-shift…
Task
Turned parts with a wide range of lengths (16 types) must be feed to a grinder. The feeding process must be performed horizontally and with only one belt conveyor. The workpieces are positioned by hand and removed by a gantry gripper provided by the customer. In order to keep the standstill…
Problem definition
In a welding plant for truck supports, four workstations have to be fully automatically interlinked with six welding cells. The manually pre-cured components are transported on pallets on two parallel conveying paths and delivered with precise positioning. Handling robots…
