mk supports innovations in the machine and system construction sector, from the prototype all the way to standardised production. Our experts develop and produce custom-tailored solutions for all sorts of production and supply chain applications – wherever transfer technology needs to be perfectly integrated into your systems.
Problem definition
A foil wrapping machine for manufacturing delivery note pockets with glued-on hook-and-loop fasteners is to be fully retrofitted and renovated. The machine processes 80 m of foil or silicone paper fully automatically to produce 1,000 delivery note pockets per minute. The system’s…
Problem definition
In a production process for ball bearings, ball bearing races of various sizes are manually positioned at the corresponding processing stations. Since the cycle times vary and to prevent the worker from constantly having to set and remove parts, a simple and cost-effective…
Problem definition
Measuring chambers are required for integration in a semi-automated production plant. The chambers must be completely enclosed and blacked out for the use of 3D camera systems. The products to be inspected are to be transferred to the chamber using automated guided vehicle systems…
Problem definition
Two machines in a pipe machining process need to be interlinked. Trimmed pipe pieces need to be transported to the next machine where they can be stamped. The pipe pieces are oily and have sharp edges. The interlink system must open to allow vehicles and transport boxes to pass…
Two machining stations in a production process for cast parts need to be interlinked. The upstream and downstream machines have different cycle times. The interlink needs to restore the system’s autonomy. Two different types are produced on the line simultaneously. They are…
Problem definition
A conveyor with a transillumination station is needed for visual inspection in an automated production application. In this station the products are illuminated through the belt and examined with cameras or the naked eye for material defects, incorrect positioning, completeness or…
Problem definition
For an application in the production of non-woven strips, cut sections of non-woven fabric need to be transported from one machining station to the next. The material is very thin and light. The system needs to run at a high speed of 140 m/min. The strips must be transferred from…
Problem definition
A workpiece carrier circulation system is required for integration into a machine in a logistics process. The circulation system should be as compact as possible and offer suitable connection points so that it can be used as an individual component within the machine.
mk Solution
…
Problem definition
During the machining of sheet metal parts for home appliances, sheets are pressed to shape. The pressed sheets are transported away from the press. A worker removes the sheets and places them in a transport box for further processing. Previously the worker had to remove each sheet…
Problem definition
An automated cleaning station with an immersion bath is required in an assembly line for metal spindles. The spindles are loaded onto the conveyor by a customer-provided handling system and then transported into the cleaning solution, where they are rinsed. Any fluid and dirt…
